You're $50 Away from Free Shipping!
Free shipping on all orders over $50
7-15 days international
20 people viewing this product right now!
30-day free returns
Secure checkout
71566004
NOTE: This filament requires printing in slow speed 40-50 mm/s and temperature at 205℃ -215℃ to achieve best results. Direct drive is preferred as the material is softer than regular PLA.
Please note the filament color order will vary per spool.
ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. ePLA-Matte has high rigidity and does not require an enclosure. It has low shrinkage, no warping or cracking, and is suitable for large-size model printing. The support is easy to peel from the surface with a? smooth and flat contact surface. There will be no irritating odor during printing, which is safe and environmentally friendly.
The matte surface is delicate and does not show layer lines. The filament is not easy breakable, which contributes to a smooth printing experience. It can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.?
Note: ePLA-Matte lines are softer than other lines, so the extruder's tightness adjustment should not to be too tight, in case to affect printing.
?
?3D PRINTING FILAMENT | ePLA-Matte |
| Density(g/cm3) | 1.174 |
| Heat Distortion Temp(℃,0.45MPa) | 51 5/10 |
| Melt Flow Index(g/10min) | 2.1（190℃/2.16kg） |
| Tensile Strength(MPa) | 34.56 3/10 |
| Elongation at Break(%) | 56.1 5/10 |
| Flexural Strength(MPa) | 41.21 4/10 |
| Flexural Modulus(MPa) | 1119.41 2/10 |
| IZOD Impact Strength(kJ/㎡) | 33.15 7/10 |
| Durability | 4/10 |
| Printability | 9/10 |
| Extruder Temperature(℃) | 190 - 230℃ Recommended temperature 215℃ |
| Bed temperature(℃) | 45 - 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 - 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Glass, PEI, BuildTak, Kapton |
