Please Note that the bags provided are not covered by warranty and considered as consumables.?
eSUN eVacuum Kit (15 Vacuum Bags)
This item contains the following:
- x15 eSUN Resealable Vacuum Bags
- x2 Sealing Clips
?
If you do not already own a hand pump, desiccants and humidity indicators, you may consider purchasing the eVacuum Kit ,?
The 3D printing filament vacuum kit is a novel portable household vacuum device for vacuum storage of filaments, especially for some with high water absorption rate, such as PVA, ePA, ePA-CF, ePA-GF, ABSMAX, TPU-95A, etc. When your filaments are opened and not used up, in order to prevent them from absorbing water and affecting the print quality, you can use this kit to save your filaments. The vacuum kit can be used together with the?to achieve the best printing results for filaments.
The kit has passed BPA-FREE and FDA certification, food-grade materials, safe and environmentally friendly.
This kit includes:
- Vacuum bags x15 - Size: 30x34cm, Material: PA+PE, certified by BPA and FDA, Thickness: 0.085mm, Storage temperature: -20 to 85℃
- Sealing clip x2
- Desiccant x15
?
Note: When the humidity reaches 50%, it is recommended to replace the desiccant. Store in a dry, cool environment; avoid direct sunlight and water.
?
Product Advantages:
- The vacuum bag adopts double seal design, single-sided embossing treatment, good sealing performance, can achieve the best moisture-proof effect, and saves time and effort when pumping air
- The vacuum bag is made of BPA-FREE and FDA-certified food-grade PE+PA composite material, strong and durable, recyclable, safe and environmentally friendly
- The vacuum bag is specially designed for 3D printing filament, which can be adapted to 0.5KG/0.75KG/1KG package of 1.75mm/2.85mm/3mm filaments
- The humidity card has high sensitivity and can be used repeatedly, so you can know the dry and humidity of filaments at any time
Features?
- Double Seal Design:?Moisture-proof and dust-proof to ensure the printing quality of filaments
- The Right Size:?Wide applicability. Can be adapted to 0.5KG/0.75KG/1KG ?package of 1.75mm/2.85mm/3mm filaments.
- Single Side Embossing Treatment:?Easily transformed.?Save time and effort when pumping.
- PE+PA Composite Material: Strong and sturdy.?Recyclable, saving and environmental protection.
- BPA-FREE and FDA Certificated:?Food grade.?Safe and environmentally friendly.
?
FAQ:
Questions | ?Possible reason | Solution |
The vacuum bag cannot be vacuumed or air leakage occurs after vacuum | The bag is not completely sealed | Open the zipper of the bag and reseal the zipper with the sealing clip to ensure that the zipper is completely closed |
The air valve is not placed on a flat surface when pumping air | Re-lay the bag air valve |
The suction port of the hand pump is not in full contact with the air valve | Make sure that the suction port is placed flat above the air valve with proper pressure |
Excessive pressure on the air valve from the suction port | Adjust the pressing force of the hand pump |
The air valve is not completely closed | Press the air valve with your fingers after vacuuming |
The vacuum bag is damaged | Replace the vacuum bag |
Slow pumping | Manual pumping is slow | You can squeeze out a part of the air before pumping, the electric pumping device will be introduced later |
?
